Later he shucks them. After doing this awhile and watching a YouTube video he's gotten pretty good at shucking. Grandpa Albert a big oyster fan would be very proud! We had them sautéed and also made Oyster Stew. Delicious!
Saturday, August 3, 2013
Monday, July 29, 2013
Sechelt Rapids
| The rapids just before max current! |
The Sechelt Rapids at the Skookumchuck Narrows are one of the largest/fastest salt water rapids in the world. We hiked through the provincial park to reach the rapids about 45 minutes before maximum flood. At maximum speed the rapids can run at 14 knots. The narrows mark the entrance to the Sechelt inlet and runs south for 20 miles creating the Sechelt Peninsula. The amazing thing is at the head of the inlet there is only a very short distance across an isthmus to the Strait of Georgia. Just a mile or two and this whole inlet would be open.
Skookumchuk Narrows Provincial Park
First we had to take a 20-30 minute walk from the marina to the road which would take us to the park entrance. In the woods at that spot is located an amazing bakery. The owner understood that we would be hiking to the rapids and so he packaged our scone and blackberry bun for us to later enjoy!
-
It was a wonderful hike through a lovely forest on a very well maintained trail. It took about an hour to reach the rapids. We arrived about 45 minutes before max flood so we were able to sit and watch the currents for awhile.
AND when hiking with Al you come to learn that he can never pass up the opportunity to stop at one of these little houses...............................
The Backeddy Marina, Egmont, BC
- Posted using BlogPress from my iPhone
Red Granite Mtn
Friday, July 26, 2013
Octopus Islands
From Gorge Harbor we headed north through Beazley Pass and
the Surge Narrows. This transit is very
tide dependent with currents running up to 12 knots during flood. (FYI our boat runs at 6knots!) As we had
arrived early we prudently waited to slack and continued on to a wonderful
marine park, the Octopus Islands. We heard a lot about this special spot but had
been forewarned that it was usually crowded and most likely we would have to do
a stern tie!
Setting the anchor is
not a favorite chore! I operate the
boat “gently” backing it down while Al lets out the anchor. Sounds simple enough but there’s lots more
involved. For example, choosing the
length of the anchor chain or rode as it is called. Length is determined by tide, current and
local conditions. Another big concern in
tight anchorages is making sure that you are not laying your rode across
someone else’s rode which is often several hundred feet long and far from their
boat! This day we set the anchor with
little difficulty and then set about doing the stern tie. Fortunately, a Canadian gent anchored nearby
and who obviously was very familiar with the anchorage, rowed over and helped
us tie our stern to a tree on the shore several hundred feet away! Honestly, he did the tie! We decided that he had surmised that we might
need a little help! Thank goodness. A man of few words but obviously good deeds!|
|
| Views around Beazley Pass |
Margie Getting help setting the stern tie |
| Margie's favorite kayak time is checking the tidal zone at a minus tide. |
We stayed 3 nights in this lovely spot. It was a period of full moon and hence
extremely low tides. (BTW at low tide that
left our stern line tied to a tree about 15-18’ above where we were
anchored!) There was lots of wild life
to observe in both the water and nearby islets.
I especially enjoyed kayaking
along the shore viewing lots of very unusual marine life in the sub tidal
water. My favorite was a pink sea
cucumber about 3” thick and about 2’ long wound along a rock. While still light at 10pm, we watched the
full moon rise over the tiny little inlet where we were anchored. For
some reason, very few had chosen to visit the Octopus Islands while we were
there. We both agreed that it was one of
the most special spots we had yet gone on the boat.
| Rising full moon at 10pm...still daylight! |
- Posted using BlogPress from my iPhone
Subscribe to:
Posts (Atom)